Skip to main content
RSG ShippingRashed Al Suwaidi

Customs · Guide

Mirsal 2: How Dubai Customs Declarations Are Lodged

Dubai's declaration platform, what it validates before it will accept a submission, and why the emirate of arrival decides the procedure.

8 min readPublished
Customs documentation, a navy leather folder and a brass stamp on a walnut desk in daylight

Quick answer

What is Mirsal 2?

Mirsal 2 is the electronic customs declaration system operated by Dubai Customs and accessed through the Dubai Trade portal. Importers, exporters and registered clearing agents use it to lodge declarations, pay duty and charges, and obtain customs release for consignments arriving in or leaving Dubai.

It is a Dubai system, not a national one. Abu Dhabi declarations are lodged through the Advanced Trade and Logistics Platform (ATLP), and Sharjah, Ras Al Khaimah, Fujairah, Ajman and Umm Al Quwain each run their own platforms — so the port of arrival determines which system, registration and procedure apply.

Almost every description of importing into Dubai mentions Mirsal 2 without explaining what it is or what it does not do. It is the electronic customs declaration system operated by Dubai Customs, reached through the Dubai Trade portal, and it is the point at which a consignment’s paperwork either holds together or does not.

What Mirsal 2 actually is

Mirsal 2 is Dubai’s declaration platform. Importers, exporters and registered clearing agents use it to lodge declarations, settle duty and charges, and obtain customs release for consignments moving in or out of Dubai. It is transactional infrastructure rather than an advisory service: it validates and processes what you submit, and it does not tell you whether the classification you submitted was the right one.

The critical point, and the one that causes the most confusion: it is a Dubai system, not a national one.

The emirate of arrival decides the platform

UAE customs law is federal, but declarations are administered by the customs authority of the emirate where the goods physically arrive, and each runs its own platform.

EmirateDeclaration platform
DubaiMirsal 2, via Dubai Trade
Abu DhabiAdvanced Trade and Logistics Platform (ATLP)
SharjahE-Clearance
Ras Al KhaimahDhabi
FujairahAlFajr
Ajman, Umm Al QuwainOwn systems administered by each authority

Registration on one platform does not give access to another, and the codes, document sets and service charges are administered separately. This is why the port of entry is a planning decision rather than a detail to settle later — it determines the system, the registration you need and the procedure your team has to follow.

Getting access

Access runs through Dubai Trade, and the account has to be linked to a business registered with Dubai Customs holding a valid client or business code. Companies take one of two routes: register in their own name and file directly, or appoint a registered clearing agent who lodges on their behalf.

Either way the importer remains legally responsible for the accuracy of what is declared. See importer registration and customs codes in the UAE for what registration involves and what it does not transfer.

What the system checks — and what it does not

Validation is about the internal consistency and completeness of the declaration:

  • the declaration type, and whether it fits the movement described;
  • the tariff classification against the current tariff structure;
  • declared value, currency and the origin stated;
  • quantities, weights and package counts;
  • the transport document reference and consignee particulars;
  • whether a permit or approval the commodity requires has been recorded against the entry.

What validation does not do is confirm that your classification is correct, that your declared value reflects the real transaction, or that the commercial documents agree with one another. Those remain the declarant’s problem, and they are the most common reasons a consignment is later queried.

A declaration that passes validation has been accepted for assessment, not cleared. It can still be queried, revalued or selected for examination.

On 8-digit and 12-digit codes

The GCC tariff is structured to 12 digits and classifying to that level is good practice. It is also widely and wrongly reported that Dubai now rejects 8-digit filings. Dubai Customs Notice 02/2026, issued 30 January 2026, extends flexibility to file at 8 digits until further notice.

Treat a 12-digit position as your working record, because it is the granularity the common tariff uses and it future-proofs the file. Do not plan on the basis that an 8-digit declaration will be refused in Dubai today, and check the current notices rather than secondary commentary.

What to settle before submission

The declaration is an output. Everything that determines whether it survives assessment is decided before anyone opens the portal: the classification and the reasoning behind it, the declaration type, the customs value, the origin evidence, and whether the invoice, packing list and transport document say the same thing.

Those are the questions customs consulting answers, and they are worth answering before the cargo ships. The documents required for UAE customs clearance sets out the fields that have to reconcile between them.

This guide describes general UAE procedure and is not advice on a specific shipment. Requirements vary by commodity, emirate and authority. Ask us about your consignment before acting on it.

Related questions

Frequently asked

Do I need a Dubai Trade account to use Mirsal 2?
Yes. Access runs through Dubai Trade, and the account has to be linked to a business registered with Dubai Customs holding a valid customs client or business code. Companies either register in their own name and file directly, or appoint a registered clearing agent who lodges declarations on their behalf.
What does Mirsal 2 check before accepting a declaration?
Validation covers the internal consistency of the declaration itself: the declaration type, the tariff classification, declared value, origin, quantities and weights, the transport document reference, and whether any permit the commodity requires has been recorded. A submission that passes validation has not been cleared — it has been accepted for assessment, after which it may still be queried or selected for examination.
Does Dubai require 12-digit HS codes in Mirsal 2?
The GCC tariff is structured to 12 digits and classifying to that level is good practice. Dubai Customs Notice 02/2026, issued on 30 January 2026, extends flexibility to file at 8 digits until further notice, so 8-digit declarations are not being rejected in Dubai on that basis. Check the current notices before relying on either position.
How is ATLP different from Mirsal 2?
They serve different emirates. ATLP is Abu Dhabi's platform and consolidates customs alongside other trade and logistics services; Mirsal 2 is Dubai's customs declaration system on Dubai Trade. Registration on one does not give you access to the other, and the document sets, codes and service charges are administered separately.

Next step

Tell us what you need to move

Send us the shipment details and we will come back with the customs position, the transport plan and a price — or with the questions we need answered first.

  • No obligation, and no account setup required to get a quote
  • We say what we handle ourselves and what we would arrange for you
  • If a shipment is not viable as described, we will tell you that too
Request a quoteCallWhatsApp
WhatsApp